Skip to end of metadata
Go to start of metadata

This page details the recommended sequence of commands to start and stop an Instrument Agent



Select an Instrument

Step 1: Go to Resources

From the OOIN homepage, click on the Resources tab

Step 2: Select a Facility

In the far left column under Facility, select a facility

Step 3: Select Platform

In the main window, select a platform


Step 4: Select Instrument

On the Platform Facepage, click on Instrument tab.
Select Instrument



Command Instrument

From the stack menu in the top right corner of main window, Select Command



Start Instrument Agent

Step 1: Start Instrument Agent

Click the Start Instrument Agent button


Step 2: Confirm Instrument Agent Starts

Confirm 'OK: INSTRUMENT AGENT STARTED' is shown in Command Results


Step 3: Execute START Commands

In the following sequence,

  1. Click the EXECUTE button for RESOURCE_AGENT_EVENT_INITIALIZE 
    1. Confirm successful in Command Results window
  2. Click the EXECUTE button for RESOURCE_AGENT_EVENT_GO_ACTIVE 
    1. Confirm successful in Command Results window
  3. Click the EXECUTE button for RESOURCE_AGENT_EVENT_RUN 
    1. Confirm successful in Command Results window
  4. Click the EXECUTE button for DRIVER_EVENT_START_AUTOSAMPLE
    1. Confirm successful in Command Results window



Stop Instrument Agent

Step 1: Execute STOP Commands

In the following sequence,

  1. Click the EXECUTE button for DRIVER_EVENT_STOP_AUTOSAMPLE
    1. Confirm successful in Command Results window
  2. Click the EXECUTE button for RESOURCE_AGENT_EVENT_RESET
    1. Confirm successful in Command Results window



Step 2: Stop Instrument Agent

Click the Stop Instrument Agent button

Step 3: Confirm Instrument Stop

Confirm 'OK: INSTRUMENT AGENT STOPPED is shown in Command Results






Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.